Are you using the correct size outrigger pads for the job? A question we ask during each of our training programs to every operator and the answer is typically the same one: “I’m using what is or was on the truck”. While it’s a fair answer, it’s not the right answer. The response I provide to them is also easy: “what type of soil conditions are you facing this day? While that seems pretty easy, the truth of the matter is also apparent and that is, these small, largely unregulated crane sizes were put together by an installation facility with little to no regard to ground conditions and it is NOT up to the installer to even put pads on
Picker Crane Certification in Alberta
Picker Crane Certification in Alberta Operating a light duty knuckle boom crane is a big responsibility, as these small ‘picker’ cranes, as they are often referred to, are capable of hoisting loads that can, if rigged wrong and moved incorrectly, WILL harm people and property if not handled properly. Here at Light Duty Crane Safety, safe use of the crane is our #1 top priority, which is why all your crane operators should be on your customers site with fully certified operators who are experienced in their field. If you are looking into what certifications are required to operate a crane in Alberta so you can be sure that if you take our crane operator safety program and you have
Is Picker Training Mandatory?
In Alberta, many people often ask us if “certification” equals “qualification,” and, if not, what the difference is. The main difference is the level of testing required. Qualification is done by the employer (think along the lines of competency), and may or may not involve formal testing; It is at the discretion of the employer’s qualified evaluator. Certification requires third-party testing to provide a consistent and accurate means to determine a person’s technical knowledge and hands-on skills related to the task. If you would like to know more or have more questions, such as: “Is picker training mandatory?”, or “do I have to recertify my picker operators every 3 years?” All great questions and we get that a lot. In
Light Duty Crane Training in Alberta and Saskatchewan
If your Company Has Any of the Cranes Shown in The Photo and You Want Training for Them, We Have The Program You Need. We provide On-Site training for your operators no matter where you are located in Alberta or Saskatchewan! Knuckle boom cranes are the most common of them, they are very versatile, are generally installed on a variety of trucks, equipment, boats, and so much more! The brands we have trained our customers on are HIAB, Palfinger, Fassi, Ferrari, Copma and more! Knuckle Boom Crane Safety Training The bigger your crane becomes it’s likely to have remote control on it for operations and this is by far the BEST scenario as you are always moving with the load
Carry Deck Crane Operator Safety Training – Alberta
Onsite Carrydeck Crane Operator Safety Training If you are looking for operator safety training for your Broderson carry deck crane or any other brand such as Shuttlelift, Terex or any brand of carry deck crane, we have the instructor and the training for either a 1-day (mainly geared for new operators or those who don’t use the crane much), to our 2-day more comprehensive program. This on-site carrydeck crane safety training both 1 and 2 day training program will cover the following areas – – Exceeds CSA Z150-16 Standards for Crane Operation – Carry deck crane fundamentals – Principals of load balance, stability, capacity and driving on wheels loaded – Load control & Lift planning scenarios – Daily inspection and set