Do You Need Crane Training?

For Crane Training in Alberta, Saskatchewan or NWT, actually all across Canada we have a CSA “Standard” that each Province in Canada will take it’s own “standard” from to develop respective OH&S standards for. While there is no “laws” per-se as we are always asked about in many phone calls, there is the minimum standard required to provide specific training for specific tools.   Did you know that OH&S officers have the power to charge you or your operator with a criminal offence if warranted.  If that doesn’t get one thinking nothing truly will. A crane gets no more specific to lifting than does a Rigid 300 power thread unit to…well threading pipe, it simply doesn’t.   Some of the training that

Knuckle Boom Crane Winch – Clearing up the confusion

Who would have thought that a winch could create so much confusion on a knuckle boom crane in Alberta, Saskatchewan and other provinces as well. The winch shown to the left is pretty unique compared to the one below.  What is the biggest difference you ask?  Well the one on the left is controlled by the cranes overload system, meaning it is tied DIRECTLY into the cranes controls and safety overload system. Now, most if not all now should be factory supplied winch systems in Western Canada, but there are literally 1000’s of the “old-school” winches in service today and the issue is BIG against these systems as many owners more than likely already know…no A2B or alternate that will

Did You Just Purchase a New Knuckle Boom Crane?

We often are asked about our picker training for brand new cranes. If you are in Alberta or Saskatchewan and just bought a new HIAB, Palfinger or any type of knuckle boom crane, you may already have experienced operators in your company and that’s great if you do (how much experience do they have?), or you got a contract with another company and are looking to add a knuckle picker to your fleet but are not sure of the regulations, standards, laws, etc.  That is where we come in and will help you through the “stuff” out there.  We cut through the noise in Alberta, Saskatchewan and Northwest Territories to get you what you need…INFORMATION! This is what we also

HIAB Crane Training – Wabasca

I’ve had the pleasure of working with many folks over the past 7 years and in Wabasca if you have ever been there, well it’s got great fishing lakes, really great people and well, for me it’s got light duty HIAB cranes to instruct on. The HIAB-055-CLX is a pretty darn good little crane, with 3 hydraulic extensions on it it picks near 880 KG at 9.3m.  One of the biggest complaints I point out and see all the time is that when this crane or the larger HIAB 077CLX -3 is mounted on a Ford F550 regular cab chassis, these cranes in Alberta are typically installed directly in front of the rear axle, which you may or may not

Light Duty Picker Training Locations in Alberta

Your company will have one of the best trained operators by one of the best trained instructors in Canada. We have our light duty picker instructor based in Edmonton, as well as Calgary, Saskatoon and Regina. So we cover both provinces and come right out to your shop, office, lay down yard.  We’re also providing crane training in conjunction with a strong safety company in Bonnyville and with the Alberta Construction Safety Association in Edmonton for open classes. These are generally held once every 2 months as right now there is less demand in our provinces than there once used to be. That said if you have a HIAB, FASSI, PALFINGER or any brand of picker, UNDER 8-tons in either